High Capacity Center Hole Load Cell
The ELC-30S-H is a high capacity center hole resistive strain gage type load cell. It is used to determine the load in rock bolts, tieback anchors, etc through a center hole. It is similar to the ELC-30S load cell. It comprises of sixteen 350 Ohm resistance strain gages, wired to form a 1400 Ohm bridge, inside a stainless steel cylinder of high steel strength, in a load cell with a capacity above 5000 kN. The 3500/185 and 5000/202 load cells are welded using the electron beam welding technique.
Description
The ELC-30S-H is a high capacity center hole resistive strain gage type load cell. It is used to determine the load in rock bolts, tieback anchors, etc through a center hole. It is similar to the ELC-30S load cell. It comprises of sixteen 350 Ohm resistance strain gages, wired to form a 1400 Ohm bridge, inside a stainless steel cylinder of high steel strength, in a load cell with a capacity above 5000 kN. The 3500/185 and 5000/202 load cells are welded using the electron beam welding technique.
Compare Our Products
Instrument Name
Center hole load cell
—
—
Sensor Type
Resistive strain gage, high capacity
—
—
Construction
8 to 16 gages mounted to reduce positioning effect
—
—
Application
To measure large load in rock bolt anchors, tiebacks
—
—
Parameter
Load/force
—
—
Range
3500/185, 5000/202, 7500/227, 10000/210 kN/mm (ID); specify
—
—
Key Testing / Calibration
Accuracy test, Overload test
—
—
Key Feature/Advantage
3500/185, 5000/202 load cells are hermetically sealed with electron beam welding, great resistance to extraneous forces, long fatigue life, protected against dust, moisture and adverse environmental conditions
—
—
Protection (Waterproofing)
IP-68, water resistant up to 10 mwc
—
—
Dimension (mm)
Depends on range
—
—
Other Load Cell Products
Direct To Your Inbox !
Subscribe to our monthly newsletter and get access to the latest industry trends, insights & updates.