Encardio-rite provides a complete range of accessories for its
geotechnical instruments and automatic data logger systems.
We offer high-quality cables of international standards-compliant, for connection with our vast range of geotechnical instruments. Our Cables ranges from polythene insulated armoured cables, petroleum jelly-filled, and water blocking ones. All the cables have one or two shielded/armoured pairs which prevent them from electromagnetic interference. These cables are waterproof with good electrical properties and are suitable for installation in a rough environment. They can also be embedded in the concrete or buried in the soil.
We also offer a varied range of cable splicing kits that are compatible with the cables provided and can be installed in a rough environment, embedded in the soil, graded material or in concrete.
Encardio-rite Cable Junction Box includes the following types:
The Model EJB-10-4-YZ Junction Box can be used to connect input from 10 sensors through ten 4-core input cables to one output cable.
The Model EJB-10-6-YZ Junction Box is similar to Model EJB-10-4-YZ. It can be connected to input from up to 10 sensors through 6-core input cables to one output cable.
The Model EJB-N-X-YZ Junction Box is suitable for connecting input through N (specify number) X-core (specify core) input cables to one output cable.
Encardio Rite also deals with 4 different models of the Switch box.
Each model is suitable for connecting and switching input from up to 10/12 sensors through 10/12/X 4-core input cables to the readout unit and one output cable. Each model is specifically designed to connect and switch input from various sensors.
EJB-10-4-YZ - Suitable for connecting and switching input from up to 10 sensors through ten 4-core input cables to the readout unit and one output cable.
ESB-12-4-YZ - Suitable for connecting and switching input from up to 12 sensors through twelve 4-core input cables to the readout unit and one output cable.
ESB-12-X-YZ - Suitable for connecting and switching input from up to 12 sensors through X-core (specify core) input cables to the readout unit and one output cable.
EJB-N-X-YZ - Suitable for connecting and switching input through N (specify number) X-core (specify core) input cables to the readout unit and one output cable.
Junction box, switch box and terminal boxes are used for cable termination, the extension of multiple sensors into a single multi-core cable and fixing the junction boxes at an individual monitoring location. In case manual readings are to be taken, junction boxes/switch boxes simplify the solution. This completes the Encardio-rite accessories range.
