Multi-channel Datalogger

Multi-channel Datalogger
Model ESDL-30 SDI-12 digital interface datalogger

ESDL-30 datalogger is designed to log data from sensors with SDI-12 interface. Any sensor with a SDI-12 signal interface can be connected to the datalogger. It can be programmed to take a measurement from 5 seconds to 168 hours in linear mode. All the measured data is stored together with the current date, time and battery voltage, as a data record in the internal non-volatile memory of the datalogger.
Following options are available:

  • > Telemetry through GSM/GPRS modem
  • > Readout/data retrieval using laptop

Download Datasheet

SDI-12 digital sensor networking system

The SDI-12 system allows a huge reduction in cabling costs as only a single three conductor cable is required to interconnect the sensors, multiplexers and dataloggers in a network that can be spread over a wide area.
Encardio-rite provides SDI-12 interface units for various types of sensors like vibrating wire, resistive strain gage type, MEMS technologies tipping bucket rain gauge etc. to connect to Encardio-rite model ESDL-30, SDI-12 interface datalogger.

Download Datasheet

Input Sensor with SDI-12 signal interface.
Scan/upload interval 5 seconds to 168 hours
Memory capacity Flash Memory (64-MB); 2 Million data points.
Data Output format CSV text file. Can be easily imported in many third party application like Microsoft® Excel.
Communication port RS-232 (Standard) 115 kbps
Temp. measurement range -20 to +70ºC with 0.1ºC resolution.
Operating temperature range -30 to 70ºC
Humidity 100%
Power supply 2 x D size 3.6 v/19 Ah lithium cells, or
2 x D size 1.5 V Alkaline high power cells, or
12V SMF battery chargeable from AC mains or solar panel
Housing Corrosin resistant weather proff enclosure.
Antenna (in telemetry option) Built-in or separately mounted antenna.